BlueRetro Nintendo 64 Bluetooth Controller Adapter

This RetroScaler BlueRetro N64 Bluetooth Controller Adapter connects selected modern Bluetooth controllers to an original Nintendo 64 console. The compact wireless receiver plugs directly into an N64 controller port, providing plug and play with no console modification required and no separate power supply.

The adapter uses the open-source BlueRetro hardware and software platform to translate compatible Bluetooth controller inputs into Nintendo 64 controller commands. It supports analogue control, configurable button mapping and selected Nintendo 64 accessory functions.

It offers wide compatibility with the Nintendo Switch Online N64 Controller, Nintendo Switch Pro Controller, official Sony DualShock 4 and DualSense controllers, Bluetooth-enabled Xbox One controllers and Xbox Series X|S controllers. Selected 8BitDo, Retro-Bit and generic Bluetooth HID controllers can also be used, although compatibility, button layouts and analogue behaviour can vary between controller models and operating modes.

A built-in virtual Controller Pak, commonly referred to as an N64 Memory Pak, provides four selectable 32KB storage banks for compatible game saves. This provides 128KB of total virtual save storage without requiring a separate physical Controller Pak. An uninitialised bank needs formatting before use, and existing bank data can be downloaded for backup or restored through the browser-based Controller Pak Manager.

Rumble Pak emulation is also supported with compatible controllers and Nintendo 64 games. The virtual Controller Pak and Rumble Pak operate as separate modes and cannot be used simultaneously. Select the accessory mode required by the game before playing.

Button assignments, analogue settings and accessory modes can be managed using BlueRetro Web Config. This allows you to adapt modern controller layouts to Nintendo 64 games, including assigning the N64’s C-button functions to suitable buttons or stick directions. Available physical controls and vibration support depend on the connected controller.

For specialist software, BlueRetro also offers N64 Mouse and Randnet Keyboard emulation. These modes require compatible Bluetooth input hardware, the correct output configuration and mapping preset, and software designed to support the original peripheral.

Each adapter supports one wireless controller through one Nintendo 64 controller port. For multiplayer, use a separate adapter for each wireless player. Compatible wired controllers can remain connected to other available ports.

Available in Black, Grey and Clear, this BlueRetro Nintendo 64 wireless controller adapter is supplied from UK stock, with fast UK delivery, tracked delivery available to supported destinations worldwide and a 12-month Retrolize warranty.

Explore our Nintendo 64 parts, mods and accessories and our complete range of Bluetooth controller adapters for retro consoles.

If you also need a controller, explore our wireless controllers for retro consoles. Choose a compatible Bluetooth model for use with this adapter.

Brand: RetroScaler
Product Name: BlueRetro Nintendo 64 Bluetooth Controller Adapter
Product Type: Bluetooth controller adapter & wireless receiver
Platform: BlueRetro open-source hardware & software
Wireless Technology: Bluetooth BR/EDR & Bluetooth Low Energy
Wireless Receiver: Integrated BlueRetro receiver
Receiver Connection: Original Nintendo 64 controller port
Receiver Power: Console controller port
Controllers Per Receiver: 1
Console Modification Required: No
External Power Required: No
Wireless Compatibility: Selected Nintendo, Sony, Microsoft, 8BitDo, Retro-Bit & generic Bluetooth HID controllers
Console Compatibility: Original PAL, NTSC-U & NTSC-J Nintendo 64 consoles
Virtual Controller Pak Storage: 128KB total
Controller Pak Banks: 4 × 32KB
Controller Pak Backup & Restoration: Supported through BlueRetro N64 Controller Pak Manager
Rumble Support: Rumble Pak emulation with compatible controllers and games
Controller Pak & Rumble Simultaneously: Not supported
Transfer Pak: Not supported
Button Mapping: Configurable
Analogue Settings: Configurable
Optional Peripheral Modes: N64 Mouse & Randnet Keyboard emulation with compatible input hardware and software
Configuration: BlueRetro Web Config
Firmware Updating: OTA updating with hardware-compatible firmware
Colour Options: Black, Grey & Clear
SKU — Black: BR-N64-BLK
SKU — Grey: BR-N64-GRY
SKU — Clear: BR-N64-CLR

Original Nintendo 64 Consoles

PAL Nintendo 64 Consoles: Supported
NTSC-U Nintendo 64 Consoles: Supported
NTSC-J Nintendo 64 Consoles: Supported

Compatible Bluetooth Controllers

Nintendo Switch Online N64 Controller: Supported
Nintendo Switch Pro Controller & Joy-Con: Supported with the appropriate mapping and configuration
Nintendo Wii Remote & Wii U Pro Controller: Supported
Official Sony DualShock 4 Controller: Supported
Official Sony DualSense Controller: Supported
Official Sony DualShock 3 & Sixaxis Controllers: Supported with additional first-time pairing setup
Bluetooth-Enabled Xbox One Controllers: Supported
Xbox Series X|S Wireless Controllers: Supported
Selected 8BitDo Bluetooth Controllers: Support varies by controller model, firmware and operating mode
Selected Retro-Bit Bluetooth Controllers: Support varies by controller model, firmware and operating mode
Selected Bluetooth HID Controllers: Support varies by controller hardware, firmware and operating mode

Nintendo 64 Accessory Functions

Virtual Controller Pak / Memory Pak: Supported
Selectable Controller Pak Banks: Four
Total Virtual Save Storage: 128KB
Controller Pak Backup & Restoration: Supported through BlueRetro N64 Controller Pak Manager
Rumble Pak Emulation: Supported with compatible controllers and games
N64 Mouse Emulation: Supported with compatible Bluetooth input hardware, configuration and software
Randnet Keyboard Emulation: Supported with compatible Bluetooth input hardware, configuration and software

Connection Requirements

Controllers Per Adapter: One
Adapters Required For Multiplayer: One adapter for each wireless controller
Maximum Adapters Per Console: Up to four
Console Modification: Not required
Separate Power Supply: Not required
Insertion & Removal: Switch the Nintendo 64 off first
Web Configuration: Compatible browser with Web Bluetooth support on a Bluetooth-enabled computer or Android device

Compatible Bluetooth Controller Required: A supported Bluetooth controller is required and is not included.

Controller Compatibility: Support can vary between controller models, hardware revisions, firmware versions and operating modes. Bluetooth connectivity alone does not guarantee compatibility.

Xbox Compatibility: Xbox Series X|S and Bluetooth-enabled Xbox One controllers are supported. Xbox 360 controllers and original Xbox One controllers without Bluetooth are not supported.

PlayStation 3 Pairing: Only official Sony DualShock 3 and Sixaxis controllers are supported. These require additional first-time pairing setup using a compatible computer. Follow the BlueRetro controller pairing guide.

Bluetooth Controllers Only: Controllers that operate exclusively through a proprietary 2.4GHz receiver or USB dongle cannot connect through Bluetooth. For controllers with multiple connection modes, use the supported Bluetooth mode.

One Adapter Per Controller: A separate adapter and available Nintendo 64 controller port are required for each wireless player.

Controller Pak & Rumble Pak: These operate as separate modes and cannot be used simultaneously. Rumble requires a controller with supported vibration hardware and a compatible game.

Controller Pak Formatting: An uninitialised virtual Controller Pak bank must be formatted before it can store saves. Use the BlueRetro N64 Controller Pak Manager or a game that supports Controller Pak formatting. Formatting erases the selected bank’s contents; back up existing saves first.

Transfer Pak: Transfer Pak emulation is not supported.

Four-Player Setups: Using four adapters relies on the Nintendo 64 having a healthy power supply. An aged or failing power supply may cause connection or stability problems.

Hot Plugging: Switch the Nintendo 64 off before inserting or removing the adapter.

Firmware Compatibility: Firmware is hardware-specific. Only install a firmware file explicitly confirmed as compatible with this exact RetroScaler adapter. Firmware for a different BlueRetro adapter or the RetroScaler four-controller model must not be assumed compatible.

First-Time Pairing

1. Switch the Nintendo 64 off.
2. Connect the BlueRetro adapter to an available Nintendo 64 controller port.
3. Switch the console on. The adapter should enter pairing mode; if required, use its pairing control as described in the supplied instruction booklet.
4. Place the supported Bluetooth controller into its pairing mode.
5. Wait for the controller and adapter to connect, then test the controls before starting a game.
6. Once pairing information has been stored, the controller can normally reconnect by being switched on again.
7. Always switch the Nintendo 64 off before removing or changing the adapter.

Using Controller Pak & Rumble Pak Modes

Accessory Mode: With the default BlueRetro mapping, the mapped Home function switches between virtual Controller Pak and Rumble Pak modes.
Save Bank Selection: The mapped Capture or TouchPad function cycles through the four virtual Controller Pak storage banks.
Game Setup: Select the required accessory mode and save bank before starting or loading a game.
Simultaneous Use: Controller Pak and Rumble Pak emulation cannot operate simultaneously.

These actions refer to the functions assigned in BlueRetro’s mapping. The physical buttons available depend on the connected controller and any custom mapping.

Using BlueRetro Web Config

1. Switch the Nintendo 64 on with the adapter connected.
2. Ensure that no controller is currently connected to the adapter.
3. Open BlueRetro Web Config using a compatible Chrome-based browser on a Bluetooth-enabled desktop computer or Android device with Web Bluetooth support.
4. Connect to the adapter through the browser.
5. Configure button mappings, analogue settings and accessory modes as required, then save the changes.
6. Disconnect the configuration session, reconnect the controller and test the controls.
7. Only install firmware explicitly confirmed as compatible with this exact RetroScaler adapter.

Setting Up & Managing Controller Pak Saves

1. Power the console with the adapter connected and disconnect the Bluetooth controller.
2. Open the BlueRetro N64 Controller Pak Manager using a compatible browser and connect to the adapter.
3. Select the Controller Pak bank you want to manage.
4. Use Read to download a backup of existing bank data before making changes.
5. If the bank is uninitialised, use Format to initialise it. Formatting erases the selected bank.
6. Use Write only when restoring the appropriate compatible MPK bank file. This replaces the selected bank’s contents.
7. Disconnect the browser session, reconnect the controller and select Controller Pak mode and the required bank before loading the game.

Optional N64 Mouse & Randnet Keyboard Modes

BlueRetro supports N64 Mouse and Randnet Keyboard emulation through its output configuration. These modes require compatible Bluetooth input hardware, the appropriate mapping preset and software that supports the original peripheral.

For mouse emulation, select the Mouse output mode and Default Mouse preset. For keyboard emulation, select the Keyboard output mode and Default Gamepad/Keyboard preset. These are specialist peripheral modes rather than general mouse or keyboard support for every Nintendo 64 game.

Connection & Control Troubleshooting

Controller Will Not Pair: Check that it supports Bluetooth, is using the correct operating mode and is in pairing mode. Disconnect it from another device if necessary.

Web Config Cannot Find The Adapter: Disconnect the controller first and check that the computer or Android device has Bluetooth enabled and a browser with Web Bluetooth support.

Analogue Stick Does Not Centre Correctly: Leave sticks and triggers in their neutral positions while connecting. With Xbox controllers and other supported XInput devices, press a face button a few times after connection while leaving the sticks and triggers untouched.

Controller Pak Is Not Recognised: Check that Controller Pak mode and the correct bank are selected. An uninitialised bank needs formatting before use; do not format a bank containing saves you want to keep.

1 × RetroScaler BlueRetro Nintendo 64 Bluetooth Controller Adapter in the selected colour
1 × Instruction booklet
1 × Retail box

This RetroScaler BlueRetro Nintendo 64 Bluetooth Controller Adapter is covered by a 12-month Retrolize warranty against manufacturing defects and hardware faults arising during normal use from the date of delivery.

The warranty does not cover accidental damage, liquid damage, forced insertion, hot plugging, unauthorised modification, incorrect external power, incorrectly performed or interrupted firmware updates, or firmware not explicitly confirmed as compatible with this exact adapter model.

An adapter rendered unresponsive or unusable—commonly referred to as “bricked”—because of an incompatible, interrupted or incorrectly performed firmware update is not covered by the Retrolize warranty.

Compatibility differences caused by unsupported controllers, proprietary 2.4GHz receivers, third-party controller firmware, individual games or unsupported operating modes are not considered product faults.

Warranty claims remain subject to the full Retrolize warranty terms and are additional to the customer’s statutory rights.

Do I Need This Adapter To Use A Bluetooth Controller On An Original Nintendo 64?

Yes. Original Nintendo 64 consoles do not contain Bluetooth hardware. One adapter is required for each wireless controller.

Can I Use A PS5 DualSense Controller On An Original Nintendo 64?

Yes. An official Sony DualSense controller can connect through this BlueRetro Nintendo 64 adapter.

Can I Use An Xbox Controller On An Original Nintendo 64?

Xbox Series X|S controllers and Bluetooth-enabled Xbox One controllers are supported. Xbox 360 controllers and original Xbox One controllers without Bluetooth are not supported.

Can I Use The Nintendo Switch Online N64 Controller?

Yes. The Nintendo Switch Online Nintendo 64 Controller can connect to an original Nintendo 64 console through this adapter.

Can I Use An 8BitDo Controller?

Selected 8BitDo Bluetooth controllers are supported. Compatibility can vary according to the controller model, firmware and selected operating mode. A model that only uses a proprietary 2.4GHz receiver cannot connect through Bluetooth.

Does The Adapter Support Nintendo 64 Game Saves & Rumble?

Yes. The adapter provides a virtual Controller Pak, also commonly called a Memory Pak, with four selectable 32KB storage banks and 128KB of total virtual save storage. Separate Rumble Pak emulation is also supported with compatible controllers and games.

Do I Need To Format The Virtual Controller Pak?

An uninitialised bank needs formatting before it can store saves. Use the BlueRetro N64 Controller Pak Manager or a game that supports Controller Pak formatting. Formatting erases the selected bank, so back up any existing saves first.

Can Controller Pak Saves & Rumble Be Used At The Same Time?

No. Controller Pak and Rumble Pak emulation operate as separate selectable modes and cannot be used simultaneously.

Does It Support The Nintendo 64 Transfer Pak?

No. Transfer Pak emulation is not supported.

Can I Use A Controller’s 2.4GHz USB Receiver?

No. Controllers that work only through a proprietary 2.4GHz USB receiver cannot connect through Bluetooth.

What Do I Need For Wireless Multiplayer?

Each player requires a compatible Bluetooth controller, a separate BlueRetro adapter and an available Nintendo 64 controller port. Up to four adapters can be connected, although a healthy Nintendo 64 power supply is particularly important when powering four adapters simultaneously.

Can I Remap The Controls?

Yes. Button assignments, analogue settings and accessory modes can be configured through BlueRetro Web Config using a compatible Chrome-based browser and a Bluetooth-enabled computer or Android device with Web Bluetooth support.

Can I Back Up My Controller Pak Saves?

Yes. The BlueRetro N64 Controller Pak Manager lets you download the selected bank’s data and restore a compatible MPK bank file. Restoring a file replaces the selected bank’s existing contents.

Is International Delivery Available?

Yes. Tracked international delivery is available to supported destinations, with the available services, delivery times, duties and taxes shown at checkout.