Premium Fully Shielded CVBS Sync RGB SCART Video Cable - Sega Saturn

Get a cleaner analogue picture from your Sega Saturn with this Premium Fully Shielded On-Sync RGB SCART Cable.

The Sega Saturn provides native RGB video through its AV output, allowing the cable to carry the red, green and blue picture channels separately. This produces stronger colour separation, cleaner edges and a more detailed image than the console’s standard composite-video connection.

Composite video is used as the synchronisation source, creating a broadly compatible RGBS signal for EuroSCART televisions and retro gaming video processors. This sync-on-composite configuration should not be confused with dedicated CSYNC, as the composite signal carries both picture information and the timing required by the receiving equipment.

The cable uses 24 AWG stranded-copper conductors surrounded by aluminium foil and tin-plated copper-mesh shielding. This layered construction helps reduce electrical interference and crosstalk between the RGB, sync and audio signals.

An integrated ferrite core provides additional protection against high-frequency interference, while the internal tension support helps reduce strain on the conductors during normal use.

Inside the SCART connector, an integrated PCB houses the video-signal components and provides a secure connection between the Saturn AV plug and EuroSCART output.

Stereo sound is carried through the same SCART connection, allowing analogue RGB video and left-and-right audio to reach the connected television or video processor through a single cable.

Connect the cable directly to a scart compatible television or pair it with the OSSC or GBSC Pro to convert the original analogue RGB signal for a modern HDMI display.

At approximately 1.3 metres long, the cable provides practical placement between the console and connected equipment without leaving excessive cabling behind the television.

Product Type: Fully shielded RGB SCART cable
Compatible Console: Sega Saturn
Console Connection: Sega Saturn 10-pin AV connector
Display Connection: 21-pin male EuroSCART
Video Format: Analogue RGBS
Sync Source: Composite video / CVBS used as sync
Video Frequency: 15kHz standard-definition RGB
Compatible Video Modes: System and software-dependent 240p, 288p, 480i and 576i
Audio: Analogue stereo through SCART
Cable Length: Approximately 1.3 metres
Cable Length In Feet: Approximately 4.27 feet
Conductor Type: 24 AWG stranded copper
Primary Shielding: Aluminium foil
Secondary Shielding: Tin-plated copper-wire mesh
Internal Support: Tension cord
Outer Jacket: PVC
Interference Protection: Integrated ferrite core
Signal Components: Integrated PCB inside the SCART connector
Connector Standard: EuroSCART
Installation: Plug and play with compatible equipment
Colour: Black

Sega Saturn Consoles

PAL Sega Saturn: Supported

NTSC-U Sega Saturn: Supported

NTSC-J Sega Saturn: Supported

Compatible with standard retail Sega Saturn revisions using the original 10-pin AV output.

Compatible Displays & Video Equipment

EuroScart capable televisions: Supported

OSSC AV1 RGB SCART Input: Supported

GBSC Pro RGB SCART Input: Supported

Compatible RGBS-To-YPbPr Converter: Supported

Professional RGB Monitor: Supported with a suitable EuroSCART-to-BNC or compatible RGBS breakout cable

EuroSCART Connection: Designed for European SCART equipment and not Japanese JP21 connections.

15kHz RGB Output: Carries standard-definition analogue RGB video from the Sega Saturn.

Sync-On-Composite: Uses composite video as the synchronisation source for the RGB signal.

1 × Premium Fully Shielded On-Sync RGB SCART Cable For Sega Saturn

This Premium Sega Saturn RGB SCART Cable is covered by a 12-month limited Retrolize warranty against manufacturing defects and hardware faults arising during normal use.

The warranty does not cover accidental damage, liquid damage, crushed or cut cabling, bent connector pins, excessive pulling, damaged strain relief, unauthorised modification or faults caused by incompatible equipment.

Display incompatibility, incorrect scaler settings, JP21 equipment, composite-only SCART inputs or devices that do not accept 15kHz RGBS are not considered product faults.

Warranty claims remain subject to the full Retrolize warranty terms.